|
|
| |
|
|
| |
| SINGLE SPINDLE SWISS |
Bechler Equipment
Kaddis Manufacturing has a large compliment of Bechler Single Spindle cam equipment. These machines produce close tolerance (Swiss tolerances) in volumes from one thousand pieces to hundreds of thousands of pieces. These machines use bar stock usually straightened and ground which allows us to maintain tenths of an inch tolerances during production.
Our Bechler equipment consists as follows:
 36 Single Spindle Bechler - 10mm
1 Sindle Spindle Bechler– 20mm
3 Single Spindle Bechler Chuckers
Escomatic Equipment
From a cost viewpoint, Escomatic equipment is one of the lowest cost operations for machining small diameter parts (maximum ¼” or 6mm) to close tolerances. Escomatics use raw material in coil form which translates into less raw material stock ups for the operator. The machine/operator ratio is 6-8 machines per operator which results in an inexpensive hourly rate for this equipment. The parts produced on this equipment are usually simple part configurations with volumes of 50,000 pieces and up.
Our Escomatic equipment consists as follows:
26 Escomatics - 4mm
2 Escomatics - 6mm | | |
|
|
|
